ION Claw Gloves 3/2mm
- GBS Seams
- Claw Finger Grip
- Soft Touch
- Tatex Seam
- Tatex Grip
Measurements use the Circumference around Knuckle
: The seam technology is commonly used in thicker wetsuits (approx. 3/6 mm) and Neoprene that requires top water resistance. Glueing: The edges of the Neoprene panels are covered with a highly adhesive, UV resistant contact glue which takes a few minutes to dry, after which the glue is applied a second time to make it even stronger. Assembling: The corresponding edges of the Neoprene panels are put together by hand, then squeezed firmly together with an electric pressing tool cm x cm in order to achieve optimum resistance against tearing. Sewing: After glueing, the seams are stitched on one side only with a special blind-stitch sewing machine. A curved needle inserts an elastic seam through the Neoprene layer, without actually perforating all the way through to the other side. If you can see the stitching on one side only, then it?s a glued blind-stitch seam. Pro?s: The use of this technique makes the seam tear proof, elasticated and highly water resistant providing great insulation and comfort. Con?s: This type of manufacturing process is extremely complex, time consuming and ultimately very expensive.
Claw Finger Grip
: strong pre-curve shape, ergonomic finger shape to avoid arm pump, comfortable grip around the boom / bar
: on the outside thumb area to wipe away water coming from the nose.
: protection between thumb and index finger
: Renowned for its abrasion resistant performance, we found that Tatex, especially when wet, provides incredible grip! ION have set new standards with outstanding non-slip performance of our gloves, especially when holding a bar, boom or paddle. When placed on the span it offers a reliable and comfortable fit in the footstraps.