MFC HYDROS II | 1250 WING / KITE / WAKE / SURF PACK

The FW1250 generates a lot of gradual lift while maintaining good control for beginner riders or riders over 180lbs or for foiling in smaller waves. The Hydros FW1250 provides continual gliding with minimal wave power, smooth turns and good speed that keeps you going even in less than ideal conditions. The HYDROS is built in Carbon/PCS/Epoxy Technology and weights 2,98kg.

FW1250 PACK | PARTS:

• MAST CARBON C70: The profile allows control, speed and no drag at all. Not much lift is generated by the mast itself, everything is concentrated on the wings. Our technology allowed the mast to reach maximum stiffness and no torsion for speed, control, carving. The attachment to the board is a full Carbon/Epoxy molded plate with plate recess of 2mm to allow the mast to fit in perfectly. RTM Technology built with Carbon/Epoxy G33 Bio Resin. Length of 70cm.  Weight || 1.20Kg

• FUSELAGE: Aluminium built, FW and Mast attachment are conic to allow a perfect and precise fitting. It comes in a length of 63cm. Weight || 500gr

• FRONT WINGS | FW 1250: The FW1250 generates a lot of gradual lift while maintaining good control for beginner riders or riders over 180lbs or for foiling in smaller waves. The Hydros FW1250 provides continual gliding with minimal wave power, smooth turns and good speed that keeps you going even in less than ideal conditions. The HYDROS is built in Carbon/PCS/Epoxy Technology and weights 2,98kg.

• BACK WING | BW 225: Built in Full Carbon || Weight - 180gr

• SHIMS: Hydros is delivered with three shims, Zero, One.Five & Two.Five. Shims are needed to adjust and control the Angle Of Attack (AOA) of the back wing. Shims help dictate the amount of lift we will achieve from the back wing. The bigger the AOA the most Lift we will have, the smaller the AOA the most speed you will achieve. These should be chosen in relation to the size of the front wing that is being used.