Core Repair Parts

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

Q-PowerLine Pro Line Set for CORE Kites 2s Pro Bar

This is a custom built set of replacement fly lines for theCore 2s Pro Bar. Upgrade you Core Bar to Q-Power Line Pro and feel the difference these amazing lines make on your bar. The lines are made to be a direct replacement for the 24m Tectanium lines that come standard on the Core Pro bar.

Core Sensor 2/2S Pro Chicken Chicken Loop Replacement

For; ROTOR  Quickrelease length 35cm

Core Sensor 2/2S Pro Chicken Stick Replacement

For; ROTOR 1.1 and 2.0 Quickrelease (solid yellow and white), length 18,5cm

Core Sensor 3 Chicken Loop Small / Standard

The small loop comes standard on the Sensor 3 and is designed for freeriders and freestylers who mostly ride hooked. The smaller loop size lowers the adjuster height, which benefits shorter riders. An elasticized chicken stick is easily manipulated to make hooking in faster. After hooking in, the chicken stick can be passed through the harness hook to avoid unintentional unhooking.

Core Sensor 3 Chickenstick / Lock Tube - Standrad / Small

Replacement for Core Sensor 3 Bar

Replacement Sensor 2s and 2s Bar Center Inserts

For Sensor 2s and 2s

Core Sensor 2/2S Pro Chicken Chicken Loop Replacement - Short

For; ROTOR  Quickrelease length 22cm

Core Sensor 2/2S Pro Chicken Stick Replacement - Short

For; ROTOR 1.1 and 2.0 Quickrelease (solid yellow and white), length 15cm

Replacement Sensor Bar Safety Line

For Sensor 2s and Sensor 3

Replacement Sensor Bar S-Slide Depower Tube, Core part #6a

For Sensor 2s and Sensor 3

CORE Sensor 3 Bar Rope Slider

The Rope Slider loop is our recommended solution for wave and foil riders who use a rope harness. Its compact design brings the bar closer to the body and improves lateral movement without annoying harness slippage. To reduce friction and wear on the spreader bar rope, the metal surface of our loop is finely ground by hand. The Rope Slider is only intended for use with a sliding rope spreader bar. The safety ring can be attached in semi-suicide mode, so the leash's carabiner stays at the same level of the quick release and out of the way.

Sensor 2S, 2S+, 2S Pro Frontline Connector Ring Set

Replacement ring set to attach the frontlines to the powerline.

Included:

• 1 x middle ring: inner Diameter 8mm, outer Diameter 16mm
• 2 x outer ring: inner Diameter 13mm, outer Diameter 21mm

Replacement Core valve cap. Cap only

Replacement CORE SENSOR 3 Control Bar Only

.

Hidden line winders, snappy width adjusters, and more. Experience next-level innovation, functional design, and clean aesthetic in the ultralight Sensor 3: a legendary control bar with groundbreaking features.

Three line cluster can be used to make a custom 4 line bar. Dimensions 2cm x 1cm.