Wizardhat Hardware Set

Mystic Star Glove (3mm)

•  100% M-Flex Neoprene
•  GBS (Glued Blind Stitched)
•  Friction grip

•  M-Flex (100%)

Ride Engine Unity Sliding Rope kit :

UNITY SLIDING ROPE KIT
During the early underground-days of the kitesurfing movement, riders were looking for more freedom in movement to allow more aggressive directional changes and easier toe-side riding. Their solution? The rope spreader bar. Now freeriders and hydrofoiling fanatics have joined kitesurfers in hyping the virtues of the rope spreader bar. The Unity Rope Conversion Kit easily transforms your fixed kite hook to rope while retaining all the bene-fits of the Unity Spreader Bar.

Cabrinha adjustable pigtails for a 4-line kite. These pigtails attach to the end of your fly lines to connect to your kite. The pigtails can be adjusted by moving the knot on the pigtail to adjust the size of the loop. Always be sure to check you pigtails for wear and tear.

Dakine - FOIL WING CINCH COVERFEATURES

• Protects Wings and fuselage with a one-piece construction
• Quick and easy installation and removal
• 5mm foam padding
• Full perimeter protection
• Easily secure with side release buckle and cinch string

Buoy Wear Floating Hat with Snapback - Red

Buoy Wear Floating Hat with Snapback - Blue

Buoy Wear Floating Hat with Snapback - Black

Buoy Wear Floating Hat with Snapback - Magenta

Stealth Bar Surf Rope Slider Conversion Kit

• Slider Bar
• Short Fixed Rope
• Long Slider Rope and Locking Washer
• Slider Ring
• Mounting Screws

Stealth Bar Freeride Loop

• 24cm
• 28cm
• 32cm

Buoy Wear Floating Low Profile Hat with Snapback - Blue

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

Fix My Wing Bladders

Fix My Wing Tuff Bladders are different from any other bladder on the market. Over 2x as durable, these bladders have been specifically developed to withstand the abuse of kiteboarding. The big secret to our bladders is stretch. While other bladders are stiff and pop easily, the polyurethane tuff bladders stretch when put under pressure and then quickly go back to their original shape. Use Tuff bladders in any Wing when you want the toughest, most durable bladder available.

The Fix My Wing Tuff Bladders are bladder blanks, meaning they are just the bladders with no valves. In order to use these in a kite you will need to purchase the self-stick valves for your kite in addition to this bladder.

To properly measure the bladder size you'll need to remove the bladder from the Wing. Lay the Wing out flat with the strut side up. Disconnect any one pump hoses from the leading edge valves and push the valves into the casing. Open the zipper located near the center of the leading edge. Open the Velcro flaps or zipper on the wing tips of the wing and pull the bladder out (through the wing tip ends) of the casing a few inches. Using the spare kite line, larks head a line to each of the bladder ends sticking out of the wingtips. Have a friend hold the leading edge casing at the wingtip to keep the leading edge flat and straight while you pull half the bladder out of the center of the wing. Repeat on the other side to remove the other half of the bladder. Leave the fly lines inside the leading edge casing so you can use them to pull the new bladder in later. Once you have the bladder out of the wing, measure the bladder from end to end and choose the equal size or next size up if the bladder is between sizes.

The PKS Self-Launch Sand Anchor is another true innovation in the world of kiteboarding and self reliance. This amazing Self-Launch Beach Anchor can be used to self-launch your kite with nothing around but sand. Heavy duty durable material and webbing.

Dakine Surf Trucker Hat - Deep Blue

• Designed for water use
• UPF 50+
• Trucker styling with performance mesh back
• Adjustable chin strap
• Adjustable snapback

PKS Stainless Steel Ring Ultralight / Race Pigtail Set

The new PKS STainless Steel Ring Ultralight / Race Pigtail is the newest pigtail from PKS Distribution for the lightest weight and lowest parasitic drag universal connection between kite and bar. Stainless Steel Ring race pigtails are uniquely designed to allow for very secure connection using Fly Line only connections. Simply larks head the loop end of the Kite pigtail onto the stainless steel ring for a secure connection.

The pigtails are approximately 5 inches in length, made from Heavy Duty Elite 99 Fly Li

Features:

• Double Overhand Knot
• Smallest profile pigtail available
• Full length splice
• 100% Made In USA
• 1124lb Elite 99 Line

Don't forget to always check kite's pigtails for wear and tear.

Replacement NSI Wing Leash Line. Does not include waist or wrist strap.

Can be used on most Wing Wrist or Waist attachments.

Sizes:

• 4 Foot
• 5 Foot

The Dakine Full Finger gloves combines ultimate performance and styling, protecting your hands and fingers with a durable construction. Save your hands from the abuse of a full day on the water, and pack a pair of sailing gloves next time you head out. The compression molded neoprene and non slip palm material of the Half Finger Sailing Gloves keep your grip true. Breathable mesh construction gives you maximum comfort even on especially warm days. Also available in a fingerless version, this full-finger option gives you maximum protection for your hands and fingertips for a full day of comfort on the water.

NEW - PKS Compression Bag V2 - Ultralight

All new Ultralight material, the lightest compression bag on the market. All the same features of the new V2 Compression bag with an internal pocket for self storage and storing small items while the bag is in use. 

Replace your heavy kite bags with these light-weight and durable PKS Compression Bags. You won't believe how much weight and space you can save when packing for a trip. The PKS Compression bag is large enough to fit most kites, including your gigantic light wind kite.

The PKS Compression bags are a must have for travel. They save so much room and weight it is incredible plus there are no annoying zippers to mess with. These bags keep you nice and organized, protect your kite, and greatly lighten your load. Makes packing for a trip much easier and saves room for that extra kite to sneak in your bag. Trust us, after you get these for your kites you will not know how you ever traveled without them. The weight you save will pay for these bags after just one trip.

This bag weighs less than the standard kite backpack to provide protection for your kite during travel while reducing weight and packing size. Unlike the Dakine compression bag, the PKS Compression Bag has reinforced straps that are sewn all the way around the bag for better compression with less stress on the bag and no chance of ripping the bag open.

Duotone Wing Wrist Leash

The Duotone wrist leash makes sure your wing stays with you at all times.

The coiled leash is available in two lengths, 4' (M) and 5' (L), to have the perfect size depending on your wing span. The smaller 4' (M) is recommended for wings below 5m and the longer 5' (L) for wings 5m and bigger.

Harness line for WASP V2. Wing foiling harness line to help relieve stress on your arms, improve posture and upwind angles.  The Ozone harness line is adjustable using the knot system at the end of the rope to adapt to your reach.

Ozone Wing Harness Line v3.
Wing foiling harness line to help relieve stress on your arms, improve posture and upwind angles.  The Ozone harness line is adjustable using the knot system at the end of the rope to adapt to your reach.
 

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

• M-Flex neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

Ride Engine Unity Replacement Ladder Straps

Two replacement Unity Ladder Lock Straps?used exclusively on the Elite Carbon and Saber harnesses .

Ride Engine Unity Mega Pad Conversion kit :

Finding that you want to fly in comfort in your quest for the biggest air? Convert your Unity Spreader bar to the Unity MEGA Spreader with this pad conversion. 

NEW - PKS Compression Bag V2

Now with an internal pocket for self storage and storing small items while the bag is in use.

Replace your heavy kite bags with these light-weight and durable PKS Compression Bags. You won't believe how much weight and space you can save when packing for a trip. The PKS Compression bag is large enough to fit most kites, including your gigantic light wind kite.

Make your Pump New again with the PKS Complete Pump Rebuild kit.

Includes:

• New Pump Hose
• Pump Seal Kit
• Standard Adapters

Unity Webbing Connectiopn kit :

Lyte | Momentum | Contour | Other Brands Harnesses

The Unity Spreader Bar is compatible with harnesses that don't have Unity Ladder-Lock Straps (such as our Lyte, Momentum and Contour harnesses). Simply use the Unity Webbing Conversion Clips and you'll get the fit and performance benefits of the Unity Spreader Bar's dual TensionLock latch closures.

Use this kit to adapt the Unity Spreader Bar to other brand harnesses.

Flat water or surf, you need to create your own shade on the water. Our wide-brim No Zone Hat delivers sun coverage in a ventilated water-friendly design. An adjustable chinstrap defies the wind, while foam brim inserts keep it afloat should it get away.
 

OZONE CLASSIC TRUCKER

Color - Blue & White
Flat visor, 5 panels
One size fits all (Snap back)
47% Cotton / 25% Polyester / 28% Nylon

The Dakine No Zone Hat is a great solution to keep the sun from beating down on you all day. This comfortable hat cinches right up to your chin so it won't fall off, and keeps the sun off your head, face, and neck.

One of the most popular water wear accesories are these awesome water jerseys. The Kiteboarding.com Water Jersey keeps you going during the longest sessions. Wearing this shirt is like kiteboarding in the shade!

Flat water or surf, you need to create your own shade on the water. Our wide-brim No Zone Hat delivers sun coverage in a ventilated water-friendly design. An adjustable chinstrap defies the wind, while foam brim inserts keep it afloat should it get away.
 

Flat water or surf, you need to create your own shade on the water. Our wide-brim No Zone Hat delivers sun coverage in a ventilated water-friendly design. An adjustable chinstrap defies the wind, while foam brim inserts keep it afloat should it get away.
 

Wizardhat Cone Nut Set with m6x25mm Studs

Ozone line extensions are made to be used with all Ozone water kites and the Ozone Contact Water, C4, or Race Control Bars. Adding extensions to your lines can give your kite that extra height to find some cleaner wind and also give you a bit more power for those lighter days.

Replacement power Line Savvy Control Bar - T018-0239

2019 Mystic Kite Safety Leash - Short Various Colors

Features

•  45cm length (unstretched)

•  Soft touch, lightweight material

•  Compact carabiner

•  Neoprene carabiner cover

•  Designed for freeride / wave performance

Supportive but flexible, the Naish Surf Strap adjustable. A Narrow Strap that is very comfortable to use.

Comes with 1 Surf Strap and Hardware

Sold individually.

Mystic Stealth Bar Kiteboarding Bar

The new Mystic Stealth Bar (Composite/Stainless Steel) Kiteboarding Fixed Hook is designed for riders that prefer Freestyle and Freeride. Its equipped with a traditional stainless steel hook.

The sizing and shape of the bar is refined to reduce pressure points while the lever-lock system ensures easy closure and torsion control.

Mystic Wingboarding Harness Line - Griplock Handles

The Naish Swivel for Naish Universal and Fusion bars. The top part of this swivel holds the front lines and the bottom pulley connects to the chickenloop depower rope.  Swivel to keeps the front lines untangled.

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

PKS Trainer Kite Lines fly above the rest. PKS trainer lines are rated at 200 lbs breaking strength. The PKS Trainer lines are made from Pre-stretched Spectra to the standard trainer line length of 20 meters. Stitched loops on both ends ensure easy larkshead connection to any trainer kite brand out there. 20 meters is the standard length for trainer and small-foil lines.

We can manufacture CUSTOM LENGTH trainer kite lines if you want them shorter or longer for special applications. Please contact us for custom line prices.

These PKS lines will work on any trainer kite out there including HQ, Slingshot,  Ozone, Liquid Force, Best, Cabrinha, North, Airush, Naish, etc. Trainer kites are typically from 1m to 4m (square meters) in size.

• Floating hat designed for water use
• Quick dry Nylon Taslan or Polyesterfabric is rated UPF 50+
• Hybrid style foam brim
• Removable chin strapt
• Wicking inner lining

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

Wind, waves and sun. Surf, SUP and sail. The Dakine Surf Trucker stays put through it all to shade your eyes. The classic trucker hat features quick-drying nylon and an adjustable chin strap for a secure fit.
 

The Dakine Surf Cap Hat is a quick-drying nylon water hat designed with features to keep it on your head in even the most pounding surf. The brim on the Surf Cap flips up for paddling out and the adjustable chinstrap includes cooling ventilated mesh over the ears to keep the hat firmly in place without compromising comfort. This everyday Surf Cap provides welcome sun and eye protection out in the water.

The PKS replacement for 2013-2022 and newer Duotone / North Depower Replacement line is almost identical to the line that comes on North kites. TheDuotone /  North Depower line has a knot on one end with Dacron tape on the other end for easy installation. It's a quick and easy fix to replace your old worn-out line.

The Dakine Surf Cap Hat is a quick-drying nylon water hat designed with features to keep it on your head in even the most pounding surf. The brim on the Surf Cap flips up for paddling out and the adjustable chinstrap includes cooling ventilated mesh over the ears to keep the hat firmly in place without compromising comfort. This everyday Surf Cap provides welcome sun and eye protection out in the water.

The F6 Legacy Series Quad is a medium sized set in the Neutral template category. 1 Set of Futures F6 Quad Fins, set of 4

PKS Kook-Proof Pigtail Sets are complete 8-piece sets, set up in kook-proof fashion with different colors for inside and outside lines, and pre-set knots and pull-tabs for ease of use.  Replace worn pigtails or adapt almost any kiteboarding control bar to a kiteboarding kite.

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

• Floating hat designed for water use
• Quick dry Nylon Taslan or Polyesterfabric is rated UPF 50+
• Hybrid style foam brim
• Removable chin strapt
• Wicking inner lining

Wind, waves and sun. Surf, SUP and sail. The Dakine Surf Trucker stays put through it all to shade your eyes. The classic trucker hat features quick-drying nylon and an adjustable chin strap for a secure fit.
 

The PKS Universal Pump Adapter/ Nozzle -  Set fits on standard kite pump hoses with a bayonet connection.  The set includes an adapter for compatibility with pretty much any kite out there.

• S1 Standard Pump Adapter for 7mm and 9mm Valves
• BC Pump Adapter for Big Boston Screw Valves
• V2 Universal Kite Valve Pump Adapter for SUP Style Naish/Flysurfer/F-One/Core
• A2 Pump Adapter for North, Core, Eleveight, RRD and Cabrinha Airlock 2 Valve Pump Adapter
• M2 Max Flow Pump Adapter for Liquid Force Valves/ Reedin
• S3 Pump Adapter for Duotone and North Airport Valves with Silicone Ring

Replacement hose for Bravo 20 series Electric Pumps

A Heavy Duty hose specifically designed for use witht he high pressure Bravo 20 series pumps. Includes a double O-Ring seal on the pump side of the hose. Comes with a standard bayonet fitting on the outlet side that accepts adapters for your specific application.

The new PKS Universal Race Pigtail is the newest pigtail from PKS Distribution for the lightest weight and lowest parasitic drag universal connection between kite and bar. Universal race pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines and you will have both a loop and knot on all 4 lines allowing you to connect to any kite.

The pigtails are approximately 6 inches in length, made from Heavy Duty Elite 99 Fly Line

Features:

• Double Overhand Knot
• Smallest profile pigtail available
• Full length splice
• 100% Made In USA
• 1124lb Elite 99 Line

Don't forget to always check kite's pigtails for wear and tear.

North Line Extension set

Dyneema SK99 line extensions enable you to customise your line length for wave riding or tighter kiteloops. The Navigator Control System is supplied with 22m Lines, with a split at 12m. If you want to lengthen your lines, just choose what length works best for you!

Includes:   
4 Lines with spliced loops on both ends

Features

• SK99 Dyneema lines
• Spliced with stitched loops on all ends
• Pre-Stretched

Aqua Azul watershades combine a nice snug fit and vented lenses into a cool but practical design. An adjustable head strap for a secure fit.  They feature extra-thick 1.1mm polarized lenses with anti-impact protection for toughness and 100% UV protection for maximum outdoor clarity.

New this year, The Hoodie Water Shirt.  The Hooded Kiteboarding.com Water Jersey keeps you going during the longest sessions. Wearing this shirt is like kiteboarding in the shade!

100% performance polyester interlock; Stain- and odor-resistant; Ultra tight knit resists snagging; Moisture management wicks away perspiration from the skin; The moisture evaporates quickly from the fabric surface;

• Designed and printed in the USA
• Quality screen printing

ION Wetshirt Men LS

ION wetshirts are where fashion meets function. Made from a quick-drying and stylish fabric, they protect against UV radiation and shield sensitive skin from the harsh elements. Wetshirts can be worn as a trendy tee with shorts at the beach, or with boardies on the water.

PKS Adjustable/Universal Wingboarding Harness line.

The PKS Adjustable Wingboarding Harness line is adjustable for length and will attach to wings with handles as well as wings with a boom.

The Naish Surelock High Flow Inflate / Deflate Valve for 2020 and Newer Naish Kites and Wings.

Also Works on: 2021+ Crazyfly Kites,F-One, Flysurfer with SUP style valve.

PKS Smart Cuff Wrist Leash Cuff:

The PKS Smart Cuff is a purpose built Wrist cuff for wingboarding that has two different "locking" features. The first is a low profile "tounge" that keeps the velcro closure flat and even help to prevent anything getting under it and opening the wrist leash. The second is an over lock velcro closure that closes across the main velcro strap to prevent the wrist cuff strap from inadvertantly being opened.

• Smart Cuff with Mutiple "locking" Features
• Comfortable Neoprene Wrist lining

One Size

Mystic Brand Hoodie / Hooded Sweat Shirt
The Brand Hood is made of heavyweight fleece and features the original Mystic logo printed across the chest. Simple and comfy, this is the hoodie that most of us live in, day in and day out.

Key Features

• Arrow icon
• Features
• Mystic logo print at chest
• Branded eyelets
• Dipped end draw cords
• Regular fit

The Dakine compression kite bags are a must have for travel. Replace your heavy kite bags with this light weight compression bag. You won't believe how much weight and space you can save.  A true space and weight saver.

Sonar Stabilizer Shim Kit

This Bravo 20 Electric Pump battery will replace the battery in a Bravo 20 or Bravo 20-1 pump. It's a 12 volt, 7-9 amp hour lead acid battery. To install the battery you will need to open up the pump by removing the screws in the bottom and back of the pump.

Note: Please keep the battery charged when not in use to prolong battery life. The first charge may take as long as 12 hours to fully charge the battery. To store the pump for a long period of time without it being used, charge the battery to full and remove the fuse from the back of the pump.

The new XL PKS Adjustable Universal Pigtail is the latest and greatest pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.

Bumper  for Onewheel+ XR

• Mesh neoprene
• Flatlock stitching
• Attachment loop for wetsuit connection

Foilite Titanium - Naish Foil Assembly Screw Set - Complete set of 8 Titanium Torx Screws

•      * Three (3) M6 25mm Foilite Titanium Screws
•      * Five (5) M6 20mm Foilite Titanium Screws

Dakine Cobra Half Hook - Florida Blue

Slingshot WF-T Half Strap Foot Hook

The WF-T half strap is an excellent addition to your foil setup when learning. It makes it super easy to stay connected to your board for deep-water starts and also allows your foot to naturally disconnect in the case of a fall so you can get away from the board with ease.

Package Includes:WF-T Half Strap (Single Strap) Washer Plate and 2 Screws

There's a new quick release system on the market aimed at keeping it as simple as possible: the PKS KISS Loop. Jeff Howard is always working on new things and his most recent project is designing the most simple quick release the kite industry has seen. It's recommended for experienced kiters who want to build the most minimal and easy to use bar setup for foiling and light wind use.

The Ocean Rodeo 2nd Gen, PLKB and On Kiteboarding Bayonet fitting Inflate/Deflate valve for kites and wings.

Ocean Rodeo's screw valve used on kites and wings. This screw valve is for inflating the leading edge and struts on select wings. This valve is on a 4" 'peel and stick' base so that you can easily replace a faulty valve or assemble a new replacement bladder. The valve comes with a Velcro strip to hold the valve in place. NOT ALL OCEAN RODEO VALVES use the same Velcro. Some models use a hard Velcro (hook) on the valve and others use the soft Velcro (loop). You will need to check your kite or wing and select the correct Velcro from the drop down.


Velcro option:
Depending on the manufacturer, style and year of your kite or wing, you may need either the Hook side or the Loop side velcro onthe valve to attache to the inside of the leading edge casing. Be sure to  confirm which you need when ordering.

Foilite Torx Wing Multi Tool - T30/T40

Why Titanium:

Titanium is highly valued for its high tensile strength, as well as its light weight, corrosion resistance, and ability to withstand extreme temperatures. It's as strong as steel but 50% lighter giving it a greater Strength to Weight Ratio.
Titanium is the best material to resist the corrosion performance of seawater at room temperature, and it has excellent corrosion resistance even in polluted seawater and hot seawater. The unparalleled performance of titanium in marine settings has led engineers to refer to it as ?ocean metal?. While other metals such as steel, copper, and brass are prone to pitting, crevice corrosion, and microbiologically influenced corrosion, titanium is unique in its resistance to the corroding effects of saltwater and the marine atmospheric environment.

The FixMyKite.com North Airport Inflate/Deflate Valve will replace the inflate/deflate on all 2014-2016 models except the 2014 Vegas.  This blue cap valve is also a replacement for the North Yellow cap Inflate/deflate valve.

Crazyfly Foil Foot Strap

• Lightweight construction
• Minimal water absorption
• Molded dual density foam prevents collapsing
• Size increment adjustment hole mounting options
• Silver

The Crazyfly Chickenloop PU Tube is the stock part that comes with all Sick Bars. This PU Tube will work with all Crazyfly bars 2015 and newer.

Made from stainless steel, the Ozone Trimmer Bracket is solid and sturdy. The trimmer bracket is where the center lines connect to the bar.

  Ozone Wing Leash Quick Release. Does not include waist strap, wrist strap, or leash line. Includes the Quick Release only.

Ride Engine Minimilist EVA Foot Strap

• Thermoformed non-water-absorbing EVA
• Webbing reinforcement
• Internal screw support for a near-flush mount
• Hardware included
• Strap sold as a single unit

Mystic Wingleash - Waist

• Compact weave design when not stretched
• Bungee inside Webbing for strength
• Lark's head connection
• High strength stainless steel swivel

Breathable mesh back and light weight design makes this the perfect hat for keeping the sun off your head and out of your eyes on sunny days.

The KB Windsock, limited availability. It's perfect to display your love of Kiteboarding.com and also functions as a wind-reading tool to know wind direct and windspeed. Represent your favolrite kiteboarding shop!

Comes with small mounting pole and opening ring.

Breathable mesh back and light weight design makes this the perfect hat for keeping the sun off your head and out of your eyes on sunny days.

The CrazyFly Depower Line is the line that you use to trim the power of your kite on the Crazyfly Sick Bar. These lines wear down over time with use, and it's a cheap and easy part to replace to ensure your bar is top notch condition.

Wing Ding(Free) Hook - 1.5" Slot

Stainless Steel Safety Pulley (SS16-SS22)

SS16-SS22

Dakine Slim Footstrap | Florida Blue

The RRD Inflate/deflate Screw Valve will replace the inflate/deflate on RRD kites.  From the Leaders in Kite Repair technology, Fixmykite.com Self-Stick Valves will stick on all bladders Simply peel and stick to make a fast and easy repair, or stick it on any new bladder.

The FixMyKite.com Star Boston Screw valve is the OEM valve on Star kites 2015 and newer.

The Ozone Big Boston Inflate/deflate kiteboarding Valve will replace the inflate/deflate on 2011 and newer Ozone Kite. This valve is also a compatable replacement for the Max Flow Valve from Liquid Force Kite (2011 and later) and All Switch kites.

The FixMyKite.com Switch Boston Screw valve is the OEM valve on Switch kites 2015 and newer.  Can also be used on Ozone kites (2011 and newer).

OEM - Duotone Pigtails - 25cm

Replacement pigtails for Duotone Kites. These pigtails connect to the bridle lines coming off the kite and are where you to hook up your outside flying lines. These work with Duotone 4-line kites.

For 2017-2024 Duotone Kites

Length:
25cm

The Naish XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Naish Kites.

The Airush XL Inflate/Deflate Kiteboarding Valve will replace the inflate/deflate valve on all 2015 and later Airush Kites.  This valve is also compatabile for use on Naish 2015 and later kites.

The FixMyKite.com Slingshot Complete Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Slingshot has these on some 2015 and newer kites.

The FixMyKite.com Cabrinha Airlock 2 Screw Valve is the new inflate/deflate screw valve with a built-in pump adapter that connects straight to any standard pump. Cabrinha started using these on 2014 kites, so they work on any 2014 and newer Cabrinha. The CAP will NOT WORK in the old Airlock 1 valve base (Cabrinha Airlock with old-style cap, pre-2014), but WILL WORK in 2014 and newer Cabrinha Airlock 2 valves. Also works on cloud kites by board riding maui. Made with TearAid to work with any bladder.

NORTH HYPERFLOW INFLATE VALVE works on new North kites starting in 2020 and beyond. Valves also work on Slingshot, Cabrinha, and Eleveight kites. Made with Tear-Aid to work with any bladder

How to install a fixmykite.com self stick valve?

1. Valve Removal: If replacing valve, carefully peel off old valve. If old valve does peel off, cut around circumference of valve to remove
2. Cleaning: Wipe area where valve will be placed with provided alcohol swab. DRY COMPLETELY WITH A CLEAN PAPER TOWEL.
3. Peel and Stick: Lay bladder out flat. If possible, have a friend lightly hold bladder on table or other smooth even surface. Peel off paper backing, center valve over hole, and place valve on bladder.
4. Press: Press valve from center outward to remove air bubbles and ensure proper adhesion and creases.

*Pro Tip- Use a hair dryer to heat the valve. This makes it easier to remove the valve. After placement of the Fixmykite self stick valve use the hair dryer again to warm the adhesive. Press the valve from the center out massaging and stretching creating positive adhesion. Be careful not to overheat the bladder or new valve.

If you're unsure which value is required for your replacement project, please do not hesitate to contact us. Email:  [email protected] or Call 361-883-1473


Add Velcro Option
The "Add Velcro" option provides you with attached Velcro at the base of the valve just as you would see with the original factory bladder.  This part of the valve goes on the inside of the kite casing; the Velcro prevents the bladder from twisting when tightening the screw-cap. 

MEGA Option: The MEGA valve option refers to the size of the TEAR-AID PATCH ONLY.  MEGA patches are 4 inches in diameter as opposed to the standard valve patch which has a 3? diameter. This extra inch means 77% more adhesive base and surface area compared to the standard valve patch size. The MEGA-valve patch is necessary when the old valve is cut from the bladder or leaves a tear during removal. The additional surface area provided by the Mega valve Tear-Aid patch allows quick and easy bladder repair eliminating the need for an additional bladder patch. The Mega Valve Patch can also be used if the valve area of the bladder is warped.

If your old valve(s) cleanly peel(s) off, a larger Mega patch in most cases isn?t necessary.

Add Bladder Patch Install Kit Option
The Bladder Patch Install Kit is for use when your old valve has to be cut out of the bladder leaving a hole larger than the valve. If your old valve peels off of your bladder easily, you do NOT need the bladder patch kit. The Bladder Patch Install Kit includes a 4 X 4 bladder patch protective piece and a 6x6-Inch (15.24 x 15.24cm) adhesive patch.

The new PKS Adjustable Universal Pigtail is the latest and great pigtail for a universal connection between kite and bar. These pigtails are similar to our classic universal pigtail, but are made extra-long and feature a moveable figure-8 knot to allow for adjusting the pigtail length. This is great if your lines settle to different lengths and you need to tune them to get them to be all the same length.

These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear.

Set includes two loop-knot pigtails.

These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear.

Set includes two loop-loop pigtails.

These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear.

Set includes two loop - 3 knot pigtails.

Repair for the Megatron II Medium Chicken Loop Harness Loop repair kit.

The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs through the center of the chickenloop, bar, and depower system. This line can be used to easily replace the lines on Ozone Contact Race Control Bars 2012+ model year for both Ozone Megatron and Megatron II Chickenloops.

It's easy to session so hard you forgot how many sessions you sessioned. Always have charger on hand just in case. Perfect for the car, plane, or alongside your phone each night - always be ready to ride!

Got a tear in your canopy? The KiteFix Ripstop Refill Repair kit has everything you need to fix a ripstop tear up to 48" with color matching.

Core Sensor 3 and 3 Pro Bar Adjuster Rope
Sensor 3 and 3 Pro Bar Adjuster Cleat
Replacement control bar Adjuster Rope and Stopper Ball for Sensor 3 and Sensor 3 Pro control bars.

*Not compatible with Sensor 2 or Sensor 3S

PKS Stainless Steel Ring Pigtail Set

The new PKS Stainless Steel Ring Pigtail is the newest option PKS Distribution. Stainless Steel Ring pigtails are uniquely designed to allow for very secure connection using Fly Line only connections. Simply larks head the loop end of the Kite pigtail onto the stainless steel ring for a secure connection.

The pigtails are approximately 4 inches in length, made from standard 7/64" Spectra Line

Features:

• Stainless Steel Ring 14mm x 9mm
• Smallest profile pigtail available
• Full length splice
• 100% Made In USA

Don't forget to always check kite's pigtails for wear and tear.

Don't forget to always check kite's pigtails for wear and tear.

Sunset Wingboarding T-Shirt -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Sunset Wingboarding T-Shirt -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

OZONE - Inspired By Nature, Driven By The Elements shirt.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing
• Front and Back Design

Ozone De-Power Line (PU covered amsteel) for Contact Water V5 and Foil Contact Water V5
The Ozone Chickenloop PU/Amsteel Line is the replacement line that runs from the top of the chickenloop, through the center of the bar, and up to the cleat depower system. This line can be used on the Ozone Contact Water and Foil Freeride Control Bars V5 Click-In Loop.

North Navigator Cleat Kit

Replacement cleat kit for North Navigator control bar.

Includes:     Cleat, Base, 2x screws

Ozone Beanie

• Comfort Fit
• Embroidered Logo
• ligth weight design
• One size fits most

The Dakine Half Finger gloves combines ultimate performance and styling, protecting your hands and fingers with a durable construction. Save your hands from the abuse of a full day on the water, and pack a pair of sailing gloves next time you head out. The compression molded neoprene and non slip palm material of the Half Finger Sailing Gloves keep your grip true. Breathable mesh construction gives you maximum comfort even on especially warm days. Also available in full-finger version, this fingerless option features a unique finger pull tab design that allows easy removal when you're ready to call it a day.

Replacement Sensor 2s and 2s Bar Center Inserts

For Sensor 2s and 2s

Ozone WASP Wrist Strap (strap only, no leash line)

Replacement Wrist Strap for use with the Ozone WASP, does not include the leash line.

Wing Waist Strap/Belt V3 (no leash line), as supplied with FLY V1 and FLUX V1. Compatible with all model wings and leash lines.

The V3 Waist Strap is slim and lightweight with a new heavy duty buckle closure and size adjustment buckle. It connects to the Leash Line via a reinforced webbing loop-to-loop leash connection point.

Size:

    Adjustable 29"- 51"

M8 Hydrofoil Brass Track T-Nuts and Stainless Steel M8 x 25mm Mounting Screws - Set

These are Replacement M8 Stainless Steel T-nuts and M8 x 25mm Mounting Screws for any hydrofoil that uses the M8 T-nut including Slingshot, Duotone, North and many others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.

Here are the total dimensions of the track nuts:
15mm width
19mm length
8.5mm height
8.6mm width of center section with threads
3.95mm height from bottom of step

Mounting Screws are M8 x 25mm Socket Head Screws

M8 Hydrofoil Track Stainless Steel T-Nuts and M8 x 25mm Mounting Screws - Set

These are Replacement M8 Stainless Steel T-nuts and M8 x 25mm Mounting Screws for any hydrofoil that uses the M8 T-nut including Takuma, Naish and others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.

Mounting Screws are M8 x 25mm Socket Head Screws

Kiteboarding.com Logo Hat

Kiteboarding.com Logo Hat - The hat just landed the KB logo. 
Breathable mesh back and light weight design makes this the perfect hat for keeping the sun off your head and out of your eyes on sunny days.

Features

• Comfort Fit
• Mesh back
• ligth weight design
• 55% Polyester | 43%Cotton | 2% PU Spandex
• One size fits most

• Small - 28"-34"
• Medium - 32" - 38"
• Large 36"-42"

Rail Guards for Onewheel GT
Make it yours and protect your board in style with XR Rail Guards. These stylish and durable Rail Guards come in a host of different colors and are an awesome way to customize your board and keep it fresh.

Backed with a strong adhesive and made of thick plastic to protect your board from the wildest adventures, the XR Rail Guards have got you covered.

Crazyfly Foil Foot Strap

• Lightweight construction
• Minimal water absorption
• Molded dual density foam prevents collapsing
• Size increment adjustment hole mounting options
• Silver

Ozone replacement v2 pigtails for the new v2 Fly Lines. These pigtails connect to the control system flying lines that are spliced loop-loop fly lines. .

Set includes 4 pieces with:

• Pull-tabs on center (grey) pigtails
• Color coded and numbered inside and outside lines
  • 1 blue loop-loop pigtail
  • 1 red loop-loop pigtail
  • 2 grey loop-knot pigtails

M6 Hydrofoil Track Stainless Steel T-Nuts and M6 Mounting Screws - Set

These are Replacement M6 Stainless Steel T-nuts and M6 Mounting Screws for any hydrofoil that uses the M6 T-nut including Takuma, Naish and others. These are hard to get replacements that we now have in stock.  They are sold as a complete set.

Here are the total dimensions of the track nuts:
Track width: 8.5mm
Total width: 14.9mm
Total length: 23.9mm
Total height: 6.20mm

Mounting Screws are M6 Socket Head Screws

The Ozone Chickenloop Trim Line works as a replacement for the Contact Water and Foil Freeride Control Bars V4/V5 Click-In Loop.

Mystic Wingfoil / Wingboarding Harness Line Hook

A very compact, easy to use and very strong wing hook. With a 1..75" slot, it will work best on 1.5' Webbing but will work on webbing up to 1.75" in width or smaller.

Key Features

• Compact Wing Hook
• Fits padded and non-padded webbing
• Strong

Ozone Wingfoil / Wingboarding Harness Line Wing Hook

A very compact, easy to use and very strong wing hook. With a 1.6" slot, it will work best on 1.5' Webbing but will work on smaller 1 inch webbing.

Key Features

• Compact Wing Hook
• Fits 1.5" Webbing
• Strong

Mystic 2023 Safety Knife

Mystic 2020 Clickerbar 5.0 Multi Spreader Bar

Mystic brings the Clickerbar 5.0 to the 2020 season, get the right fit, set it and forget it.  Clickerbar allows you to pinch/press two buttons to release the spreader bar so you never have to readjust. 

Clickerbar 5.0 Kite Hook Spreader Bar

Cabrinha Trimlite Trim Line Replacement

Part- KS7TLLINE000STD
1x TrimLite Line for use on TrimLite Cleat. Includes Elastic cored line.

Mystic Wing Harness Line - Soft Handles

The ultimate harness line connection between your wing and harness or waistbelt. This harnessline is elastic, and ideal for Freestyle riders, as the chord ensures you'll remain hooked in whether you're pumping or doing a jibe. Offering optimal freedom of movement, this harnessline was designed to be attached to a wing with soft handles.

Woo 3.0 Mount

Session so hard you broke your board? Do you have a fleet of rides to take out? Get them all mounted up so you never have to worry about missing a session. The new 3.0 mount works for kiteboarding, wakeboarding, snowboarding, and skiing. Simply attach the adhesive, strap in your WOO, and go send it.

• Simple Elegent
• Simple retainer ring mount
• Compatible with all WOO versions

• Includes:
  1 - Self Adhesive Woo Mount with Retainer O rings
  2 - Spare Retainer O Rings

Ozone Bar Floats, they work as replacements on the older Ozone Contact Water, Snow, and Race bars, or use them for building your own custom bars.

The PKS Loop-Loop Pigtail Set

Clean, Easy, No Nonsense pigtails.

Length:
Approximately 6 Inches Loop-Loop

Made IN USA, By Kiteboarders, For Kiteboarders!

Naish Flag Out Line. Compatible with Torque bar ATB, BTB and Base bar.

PKS North Pigtail Set

PKS Replacement North pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear. Made from 7/64" 100% Dyneema line.

• 1 - Red Loop-Loop pigtail with pull tab
• 2 - Grey Loop-Knot pigtail
• 1 - Blue Loop-Loop pigtail with pull tab

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

PKS Reedin Pigtail Set

PKS Replacement Reedin pigtail Set. These pigtails connect to the bridle lines coming off the kite and allow you to hook up your flying lines. Always check kite pigtails for wear and tear. Made from 7/64" 100% Dyneema line.

• 1 - Red Loop-Loop pigtail with pull tab
• 2 - Grey Loop-Knot pigtail
• 1 - Blue Loop-Loop pigtail with pull tab

The Switch one-pump Self-Stick valves are the OEM valves on Switch kites; also compatible with slingshot, Flexifoil, Ozone, Mutiny, and North (Lazy Pump, Generation 1 only.)

The CORE 90-degree one pump valve is the original factory valve for CORE kites with a one-pump system.

FixMyKite.com Self-Stick-Valves will stick on any bladder material or color.  Simply peel and stick to make a fast and easy repair, or attach to a newly replaced bladder.  The specially formulated adhesive is incredibly durable making for a permanent repair.  Everything needed for installing the new valve is included in the package:  alcohol wipe and detailed instructions.

PKS High Flow One Pump Hose Kit - 3/8"(10mm) Inner Diameter

The PKS Kiteboarding High Flow One Pump Hose Kit has all you need to replace the hoses and clips for an external one pump system. Works on kites with the larger high flow one pump system. Easy to use and installs fast. Choice of 3 or 5-strut kit. Tubing is 3/8"(10mm) inner Diameter.

Kiteboarding.com - Foiler elements.  The Shirt is designed and printed in the USA.

Features

• Designed and printed in the USA
• Quality screen printing

PKS - CORE Bridle Pigtail Sliders Pigtails

Replacement pigtails for Core Kites. These pigtails connect to the bridle lines coming off the kite and are where you to hook up your outside flying lines. These work with Core4-line kites.

Made with high strength Dyneema Line

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

The new PKS Universal Pigtail V2 is the latest and great pigtail for a universal connection between kite and bar. Universal pigtails are uniquely designed to allow for either a loop to loop or loop to knot configuration with a single pigtail. Simply larks head the loop end of the pigtail onto the end of your fly lines or directly to the bridles on the kite and you're all set to connect to the loop or knot on the other side, making a nearly kook-proof connection point.

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!

Kiteboarding.com -  The Shirt is designed and printed in the USA.
Printed on Next Level 6210 the  most popular and versitle CVC 60/40 cotton/poly fabric, this t-shirt is a closet staple. This fine gauge blended fabric represents a new benchmark in value. You will be amazed by the ultra-soft hand and performance of this exclusive fabric. Lightweight combed ring-spun and poly blend. An Easy to wear shirt that is cooloing and comfortable atthe same time.
A High quality comfortable classic fit short sleeve t-shirt that is great for daily wear. These cozy crewneck shirts will withstand many wearings and washes!
Pre-laundered for accuracy in sizing, these t-shirts will stay true to fit and form, aided by the addition of durable polyester (40%)

Features

• Designed and printed in the USA
• Quality screen printing
• 60% Combed Cotton, 40% Polyester
• Machine Wash
• Tear Away Label!